The commercial ice popsicle machine can make various flavors popsicles. Popsicles made by popsicle maker are thirst-quenching food that people all over the world like. According to different raw material and formulas, you can make a variety of delicious popsicles. Especially in the summer, people have more demand for popsicles, which is the hot selling season for popsicles. This ice cream popsicle making machine is easy to operate, low cost and fast recycling, which is the first choice for entrepreneurs. You can choose different capacities according to individual need.
Operating procedure of the ice popsicle machine
1. Carefully open the machine packaging, avoid violent vibration, beware of damage to the machine casing and internal parts.
2. Please check the power supply voltage. The power supply voltage should be within 10% of the rated voltage. If it is out of range, the machine will not work properly.
3. Air-cooled unit popsicle maker machine：In the process, the popsicle maker is necessary to maintain indoor air circulation, and keep the indoor temperature not exceeding 28℃, otherwise, the working pressure of the machine is too large to be produced normally. Start the compressor and saltwater tank agitator.（The correct steering of the mixer is clockwise).
4. Water cooled unit ice popsicle machine: When testing the machine, it should be connected to cooling water. The connection method of the cooling water of the condenser: the water is sent from the bottom and goes out from the above. When starting the machine, first turn on the cooling water of the condenser. The lower the temperature of the cooling water, the better, the water temperature should not exceed +28℃. Then start the compressor and salt basin mixer.
5. The salt water (calcium chloride) concentration in the salt water pool (normal temperature) is about 28%-30%. Determinate salt water concentration frequently. Strictly pay attention to the salt water concentration should not be too light or too thick. (The brined material should be prepared before entering the pool, and it should be cooled and filtered before it enters the pool).
6. Before making popsicles and ice cream, the salt water temperature must drop below -16℃ first，then put the mold to make popsicles.
7. After 10-15minutes, take out the mold. The popsicles are finished.
Features of the commercial ice popsicle maker machine
- Brand high-efficiency compressor: fast cooling, low energy consumption.
- The popsicle maker machine is made of stainless steel which meets the food industry standard.
- Digital temperature display: which can adjust the temperature inside the box.
- Thick insulation layer which can save a lot of energy.
- Universal wheel design: Easy to move.
Technical parameters of the ice popsicle making machine
| Model | Size | Weight | Power | Capacity | Condensation mode | Refrigerant |
| TZ-40 | 600*400*960mm | 58kg | 1kw | 3000pcs/day | Air cooled | R22/R410 |
Related machine: Ice cream popsicle packing machine
The ice cream popsicle packaging machine is an automatic pillow packaging machine. It has a very wide range of applications and can meet the packaging needs of food, medicine, hardware, stationery, and other products. The popsicle ice cream packaging machine can realize automatic transmission, packaging, sealing, and other processes. And it can adjust the parameters on the control panel to realize the packaging of popsicles of different sizes.
Characteristics of popsicle wrapping machine:
- Packaging is in place and can be sealed in one step with high efficiency.
- It has the function of positioning and stopping. In the final sealing and cutting process, the packaging position is accurately detected and sealed and cut.
- It only needs manual loading in the packaging process to reduce personnel intervention.
- The machine can be used for unmarked packaging materials or packaging materials with trademark patterns.
- It widely applies in the packaging of biscuits, potato chips, soap, fruits and vegetables, toys, etc.
- It has a flexible adjustable system, and the range of packaging parameters can be adjusted automatically on the control panel.
Ice lolly packing equipment working video
USA ice cream popsicle machine and packaging machines case
Last November, Ronald Caitlyn from the United States found our website and asked for the details of the popsicle-making machine. After communicating with the customer, we learned that he has a small popsicle factory. Due to the aging of the equipment, it is necessary to replace a new popsicle manufacturing machine and seek a popsicle packaging machine with a high degree of automation. After comparison with several manufacturers, the American customer finally chose to buy a popsicle machine and a popsicle packaging machine in Taizy machinery.
| Item | Model | Qty |
| Popsicle making machine | Size:600*400*960mm Voltage:220v50hz Weight:58kg Power:900w Refrigerant: R22 Capacity:3000pcs/per day | 1 set |
| Packing machine | TZ- 250 Voltage:220v 50hz,single phase Film:Max width 230mm Packing speed:40~230bag/min Power:2.4kw Weight:800kg Size:3920*670*1320mm | 1 set |