The industrial onion peeling machine is to remove the outer layer of the onion. And then get clean onions that can be used when cooking. We have two types of onion peeling machines, small onion peeling machine and automatic onion peeling cutting machine. Both types can peel the onion in a short time. And the onion peeling machine widely applies to canteen, restaurant, and food processing industries, etc.
Type one: Full-automatic onion peeling machine
The automatic onion peeling machine does not need to classify onions, and onions of different sizes can be peeled off. There is a “cortex controller”, which can freely control the depth of peeling. The operator can use it to peel the skin or the second layer of the onion. With an onion size recognition device, this peeler can be automatically adjusted according to the different sizes of the onions.
Technical parameter of full automatic onion peeler machine
| Model | TY-400 |
| Capacity | 500-700kg/hr |
| Voltage | 380V 50HZ |
| Power | 1.5KW |
| Material | Stainless Steel |
| Size | 2100×830×1800mm |
| Weight | 248kg |
| Type: | Onion Processing Machine |
| Air supply | ≥0.8MPa |
Type two: Small onion skin removing machine
The small onion skin removal machine bears small size and is very suitable for individuals. It can peel the onion within several seconds. With a high peeling rate and low broken rate, this type of machine is very popular in the market.
Technical parameter of semi-automatic onion skin peeling machine
| Model | TY-300 |
| Capacity | 300kg/hr |
| Voltage | 220V/380V(can make after order) |
| Power | 0.4KW |
| Material | Stainless Steel |
| Size | 920×680×1420mm |
| Weight | 120kg |
| Type: | Onion Processing Machine |
The working steps of the onion peeling machine
- Onions are screened by a grading machine,
- Selected onion is delivered by elevator and the peeling machine removes the skin and roots of them.
- Onions without skin and roots then are washed by a bubble washer.
- It is better to configure a drying line if you want to store these processed onions for a long time.
Advantages of onion peeling machine
- Both machines adopt 304 stainless steel with frequency conversion control.
- The onion peeling machine has a patented air knife from the inside, which automatically masters the size of the onion and can automatically change its depth and cutting size of it.
- The small onion peeling machine can peel onion within 6-10 seconds.
- It has no damage to onions after peeling, and the surface is smooth without any contamination.
- Both peelers are characterized by practicality, power saving, high efficiency, and low failure rate.
The working steps of using an onion peeler
- Onions are screened by a grading machine,
- Selected onion is delivered by elevator and a peeling machine removes the skin and roots of them.
- Onions without skin and roots then are washed by a bubble washer.
- It is better to configure a drying line if you want to store these processed onions for a long time.
Advantage of commercial onion skin removing machine
- Both types adopt 304 stainless steel with frequency conversion control.
- It has a patented air knife from the inside, which automatically masters the size of the onion and can automatically change the depth and cutting size of it.
- The semi-type can peel onion within 6-10 seconds.
- The machine has no damage to onions after peeling, and the surface is smooth without any contamination.
- This peeler is characterized by practicality, power saving, high efficiency, and low failure rate.
| Malfunction | solution | |
| 1 | Unstable for feeding | 1. Sundries in hopper or garlic clove not separated very well
2. Feeding baffle become flexible or split 3. Feeding cylinder shaft not cleaned, locked 4. failure of feeding cylinder 5. Air pipe line split |
| 2 | Feeding start failure | 1. no compressed air inlet
2. 3-point assay blocked or pressure not reach 5kg/cm2 3. Feeding electric-magnetic valve failure 4. Failure of feeding air cylinder |
| 3 | Bad peeling effect | 1. feeding too many onions
2. peeling time is not enough 3. the air pipe blocks 4. Air compressor does not reach 8Kg 5. split of air pipe 6. too much waste blocks the peeling barrel |
| 4 | Stop peeling | 1．electric-magnetic valve failure |
| 5 | Outlet control plate is unskillful | 1. Speed not adjust very well
2. 3-point setting blocked or pressure not reach 5 kg/cm2 3. Outlet electric-magnetic valve failure 4. Outlet air cylinder failure 5. air pipe leaking 6. U-shape screw is loosen |
| 6 | Unable to start the machine | 1. Electricity protection switch is closed.
2. Electricity is cut off or connection failure 3. fuse is burnt 4. SWITCH button failure |
we also have a garlic peeler, if you need it, please click the following link
Add Comment