De-oiling machine

De-oiling machine application

The de-oiling machine is mainly used for dewatering or de-oiling units or individuals. The de-oiling machine has completely replaced the hard and laborious manual work. The machine is efficient and easy to operate. The mechanical de-oiling is of a processing speed tripled that of manual, and it really saves time, cost, and labor. This semi-automatic deoiling machine is always used in the potato chips production line.

De-oiling machine working principle

The dehydrator, de-oiling, and de-watering machine are technically supported by the centrifugal method. The inner de-oiling de-watering barrel is driven by an electric motor, during which, at a high speed rotating the water on the surface of raw material through centrifugal motion is spattered away through holes on the inner wall of the de-watering tank, so as to achieve the ideal dehydration effect.

De-oiling machine construction

The dewatering machine equipped with a rubber shock absorber can avoid damage caused by the vibration due to the unbalanced load in the de-watering drum. The enclosure is made of stainless steel, the chassis is cast iron, the outlet pipe is on the side of the barrel, and the base foot base and the column foot material are cast iron.

The spindle system is made of high-quality steel, equipped with two bearings, and supported by thrust ball bearings at the lower end to reduce wear and save power. The dewatering machine adopts a time controller to control the working time that can be set freely according to the dewatering requirement of raw materials.

Maintenance of deoiling machine

1. The operator must be familiar with the structure, performance, and operation method of the dewatering machine.
2. Feed raw materials evenly to avoid heavy vibration.
3. Do not open the top cover during normal operation to avoid accidents.
4. Do not put anything on the top cover to avoid accidents during the operation.
5. Regular maintenance shall be implemented in half a year–apply new butter onto mechanical parts.
6. The machine must be grounded!

Principle technical parameter of deoiling machine